More Info on Input Assemblyupdated 04/13/99
|
Choose a location |
Look at these shots of the Driver assembly. I only have a few more parts to make for it, then then I will finish the idler assembly. I made some of the parts out of glass so that you can see through them, a nice little trick. More part specifications and details will be added eventually.
Parts Completed Driver input shaft Driver shaft casing Driver friction plate Driver output sprocket Retaining ring |
Parts To Do Driver input sprocket Pin bearing |
Driver Assembly with casing, friction plate and woodruff key #405. |
Driver assembly with casing, sprocket blank, bearing #01 and woodruff key #405 |
Driver assembly with shaft, casing, friction plate, bearing #01 and sprocket blank |
Driver assembly with casing, bearing #01 and sprocket blank |
Driver assembly with shaft, casing, friction plate, bearing #01 and sprocket blank |
Questions? Try the help page,
or use good old e-mail
Designed by: William Margolin,
Mechanical Engineer
Modeled by: Scott Jacks,
student
Web page by: Scott Jacks,
student
email to: stevey@detroit.crosswinds.net