File Archive

updated 04/13/99

Also check on the Part Status page

Choose a location

Date Posted Description Size Part No.
* 3-10-99 snj0015.dwg Power transfer holder 204 KB 0015
* 3-10-99 snj0016.dwg Load spring 179 KB 0016
* 3-10-99 snj0016_prob.dwg the dimensioning problem is in green (update) 117 KB 0016
* 3-10-99 snj0017.dwg Frame sides 159 KB 0017
2-4-99 new_parts.zip Renderings of some of the new part files 332 KB
2-4-99 snj0005.dwg Output pressure disk 91 KB 0005
2-4-99 snj0006.dwg Co-axial driver shaft 129 KB 0006
2-4-99 snj0007.dwg Bearing retainer 68 KB 0007
2-4-99 snj0008.dwg Output shaft 95 KB 0008
2-4-99 snj0009.dwg Input shaft 131 KB 0009
2-4-99 snj0010.dwg Input pressure disk 83 KB 0010
2-4-99 snj0011.dwg Bearing container 75 KB 0011
2-4-99 snj0012.dwg Pressure transfer bearing 67 KB 0012
2-4-99 snj0013.dwg Load transfer base 202 KB 0013
2-4-99 snj0018.dwg Ratio change shaft 190 KB 0018
11-19-98 idler_14.dwg Detail of the idler. 209 KB
11-19-98 dplate_14.dwg Detail of the input friction plate 141 KB
11-19-98 dplate.sat 3D solid of the input pressure plate 30 KB
11-19-98 dcase.sat 3D solid of the input shaft casing 25 KB
11-19-98 dshaft.sat 3D Solid of the input shaft 12 KB
11-12-98 idler.sat 3D Solid of the idler 14 KB

 


Questions?  Try the help page, or use good old e-mail
Designed by: William Margolin, Mechanical Engineer
Modeled by: Scott Jacks, student
Web page by: Scott Jacks, student
email to: stevey@detroit.crosswinds.net